Mr Sweep's Stove Shop

Made by Contura

The Contura i7 Insert

Mr Sweep Rating 8.5: Out of 10

Heat output

Min

Nominal

Max

Mr Sweep Says

The Contura i7 is our cassette Insert option. It allows you to customise your fireplace exactly as you want it. Place it inside a fireplace that you design yourself or, as illustrated, create your own unique solution. The Contura i7 is black and available with cast iron door and steel frame.

Price £3750.00

Details

Nominal output - 7kw

Output range-4-9kw ( nominal tested at output 7kw)

77% Efficiency

Energy Rating A

Clean burn system

Dimensions H585mm W775mm D360mm

Net weight 100kg

Heating area 120m2

Features

In order to resist the stresses that arise with the large temperature variations, the door must be made from shape-retaining cast iron.
In the rear of the stove there is an extra duct system for spreading preheated combustion air. The system is called Clean Burning and is activated by sliding the control on the front to the left. The stove burns efficiently and for long periods resulting in a combustion with very low particle concentrations.
Contura products are equipped with a single control for exact output regulation, which allows simple and precise combustion control.
Want it fitted? If you live in Essex we can install this for you. If you have a prepared fireplace opening/chamber fitting including a direct air kit and full liner system is £3750. This includes the stove and all the parts. Hearths, Mantles and building work is not included.

Included in Package

Provide and install the above stove.
Supply and install a 316/316 stainless steel 125 Flue liner.
Supply and install 5-5 Flue adapter.
Supply and install all flue clamps.
Provide and install a multi fuel pot hanging cowl.
Supply a bespoke MADE TO MEASURE register plate.
Paint the register plate with stove paint black.
Supply and install all stove pipe.
Supply all rope and glue required.
Provide and install all vitreous pipe needed.
Supply and fit a 7-10 year carbon monoxide alarm.
Supply and fit engraved data plate (HETAS/Council requirement)
Preform a cold pressure test of the stove.
Perform a hot spillage test of the stove.
Commission the stove.
Demonstrate lighting techniques and controlling the fire before hand over of the stove.
Provide a HETAS registration certificate.

Excluded from Package

As we do not have a waste disposal or carriers licence, we do not remove rubble.
Any extra building work needed is not included in this package.

Package Details